Sumitomo QT52-63 Hydraulic Gear Pump With High Running Wear Resistance
| Shaft Length: |
35.0 LB |
| Cover End Flow @ RPM: |
Flange Mount |
| Manufacturer Part No.: |
Right Hand (CW) |
| Rotation: |
V2020-1F9S7S-11DD30 |
| Minor Diameter [Min: |
2 |
| Port Size: |
Flange |
| Cover End Pressure [Max: |
N/A |
| Pump Series: |
N/A |
| PDF |
|
Product Details
| Shaft Length |
35.0 LB |
| Cover End Flow @ RPM |
Flange Mount |
| Manufacturer Part No. |
Right Hand (CW) |
| Rotation |
V2020-1F9S7S-11DD30 |
| Minor Diameter [Min |
2 |
| Port Size |
Flange |
| Cover End Pressure [Max |
N/A |
| Pump Series |
N/A |
| Shaft End Flow @ RPM |
0.875 in |
| Displacement Shaft End (cu in/revolution) |
13 Tooth Splined |
| Spline Description |
V2020 |
| Port Orientation - Shaft End |
1 5/16 in |
| Integral Valve Configuration |
Buna-N |
| Shaft Type |
2800 |
| Mounting |
0.728 in |
| Relief Valve Setting |
SAE B, 2 Bolt |
| Controlled Flow Rate |
Single Shaft Seal |
| Shaft End RPM [Max |
16/32 |
| Mounting Flange |
2500 |
| Max. RPM [Max |
2800 |
| Minor Diameter [Max |
N/A |
| Pilot Type |
7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Port Type |
0.873 in |
| Major Diameter [Min |
0.872 in |
| GPM @ 1,800 rpm, Shaft End |
0.7335 in |
| Shaft Seal Type |
0.7225 in |
| Shaft Key |
N/A |
| Minor Diameter |
9 gal/min @ 1200 rpm, 13.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
V2020-1F9S7S-11DD30 |
| Seal Material |
2500 |
| Model No. |
2500 |
| Cover End RPM [Max |
10.5 |
| Pressure Port Size, Cover End |
13.5 |
| Shaft End Pressure [Max |
N/A |
| Major Diameter [Max |
Outlet 90° CW from Inlet |
| Weight |
Outlet 90° CW from Inlet |
| Shaft Dia. |
3/4 in SAE O-Ring |
| Displacement Cover End (cu in/revolution) |
3/4 in SAE O-Ring |
| Port Orientation - Cover End |
1.39 |
| Pressure Port Size, Shaft End |
1.81 |