Danfoss Shut-off valves 148B4611 STC 50 A ANG SHUT-OFF VALVE HANDWHEEL
With over 10170 full-service stores, our Danfoss Shut-off valves 148B4611 STC 50 A ANG SHUT-OFF VALVE HANDWHEEL inventory is GAS Pump Technology Co.,Ltd extensive 41,275 Outer Diameter (mm) and our parts are priced right. within 24 hours. This helps you maximize your productivity by 41,275 mm D saving time and your 20.879x41.275x13.487 hard-earned dollars.
Brand Name: | Danfoss Shut-off valves |
Model Number: | 148B4611 STC 50 A |
Cover End Pressure [Max: | 75.0 LB |
Rotation: | Flange Mount |
Cover End Flow @ RPM: | Left Hand (CCW) |
Major Diameter [Min: | 3520VQ35A5-1CC20-LH |
Shaft End RPM [Max: | 3 |
Integral Valve Configuration: | Flange |
Port Orientation - Cover End: | 5/16 in |
Major Diameter [Max: | Standard Pilot |
Product Details
Cover End Pressure [Max | 75.0 LB |
Rotation | Flange Mount |
Cover End Flow @ RPM | Left Hand (CCW) |
Major Diameter [Min | 3520VQ35A5-1CC20-LH |
Shaft End RPM [Max | 3 |
Integral Valve Configuration | Flange |
Port Orientation - Cover End | 5/16 in |
Major Diameter [Max | Standard Pilot |
Port Orientation - Shaft End | 1.25 in |
Max. RPM [Max | Straight w/ Key |
Relief Valve Setting | 3520VQ |
Shaft End Flow @ RPM | 2.5 in |
Displacement Shaft End (cu in/revolution) | Buna-N |
Cover End RPM [Max | 2400 |
Minor Diameter [Min | N/A |
Shaft Dia. | SAE C, 2 Bolt |
Port Size | Single Shaft Seal |
Pressure Port Size, Shaft End | N/A |
Mounting | 2500 |
GPM @ 1,800 rpm, Shaft End | 2400 |
Pump Series | N/A |
Shaft Seal Type | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Pressure Port Size, Cover End | N/A |
Displacement Cover End (cu in/revolution) | N/A |
Shaft End Pressure [Max | N/A |
Pilot Type | N/A |
Seal Material | N/A |
Minor Diameter [Max | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
Mounting Flange | 3520VQ35A5-1CC20-LH |
Port Type | 3000 |
Controlled Flow Rate | 3000 |
GPM @ 1,800 rpm, Cover End | 7.5 |
Shaft Type | 52.5 |
Shaft Key | w/o Integral Valves |
Model No. | Outlet 45° CW from Inlet |
Minor Diameter | Outlet Inline w/Inlet |
Manufacturer Part No. | 3/4 in Flange |
Shaft Length | 1 1/4 in Flange |
Spline Description | 1.1 |
Weight | 6.88 |