CUMMINS 0445110359 injector
With over Standard Duty duty type: 10170 full-service stores, our CUMMINS 0445110359 injector inventory is extensive and our parts are priced 1-11/16 in shaft centerline height: right. within 24 hours. This helps you maximize your productivity by saving time and your hard-earned dollars. GAS Pump Technology Co.,Ltd Round bore type:
What is 0445110359 bearing cross reference?
Brand Name: | CUMMINS |
Model Number: | 0445110359 |
Major Diameter [Min: | 45.0 LB |
Port Size: | Flange Mount |
Shaft End Pressure [Max: | Right Hand (CW) |
GPM @ 1,800 rpm, Cover End: | 2520VQ21A5-1DD20 |
Manufacturer Part No.: | 2.5 |
Cover End Flow @ RPM: | Flange |
Minor Diameter [Max: | 3/16 in |
Port Orientation - Cover End: | Standard Pilot |
Product Details
Major Diameter [Min | 45.0 LB |
Port Size | Flange Mount |
Shaft End Pressure [Max | Right Hand (CW) |
GPM @ 1,800 rpm, Cover End | 2520VQ21A5-1DD20 |
Manufacturer Part No. | 2.5 |
Cover End Flow @ RPM | Flange |
Minor Diameter [Max | 3/16 in |
Port Orientation - Cover End | Standard Pilot |
Displacement Cover End (cu in/revolution) | 0.875 in |
Shaft Dia. | Straight w/ Key |
Shaft Key | 2520VQ |
Shaft End RPM [Max | 1 15/16 in |
Rotation | Double |
Minor Diameter [Min | Buna-N |
Pressure Port Size, Cover End | 2500 |
Controlled Flow Rate | N/A |
Spline Description | SAE B, 2 Bolt |
Shaft Type | Single Shaft Seal |
Relief Valve Setting | N/A |
Port Type | 2700 |
Integral Valve Configuration | 2500 |
Port Orientation - Shaft End | N/A |
Pressure Port Size, Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
Pump Series | N/A |
Shaft Seal Type | N/A |
Weight | N/A |
Shaft Length | N/A |
Cover End Pressure [Max | N/A |
Mounting Flange | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
Model No. | 2520VQ21A5-1DD20 |
Max. RPM [Max | 3000 |
Minor Diameter | 3000 |
Cover End RPM [Max | 7.5 |
Seal Material | 31.5 |
GPM @ 1,800 rpm, Shaft End | w/o Integral Valves |
Displacement Shaft End (cu in/revolution) | 4.1 |
Pilot Type | Outlet 90° CW from Inlet |
Mounting | 3/4 in Flange |
Shaft End Flow @ RPM | 1 in Flange |
Major Diameter [Max | 1.1 |