Danfoss Shut-off valves 148B4649 STC 25 M ANG SHUT-OFF VALVE HANDWHEEL
Our highly-skilled and factory-trained GAS Pump Technology Co.,Ltd service experts have the 60 mm L resources to help you with all your Danfoss Shut-off valves 148B4649 STC 25 M ANG SHUT-OFF VALVE HANDWHEEL needs - including routine maintenance, major repairs, warranty service, and Danfoss Shut-off valves equipment inspections.
What is 148B4649 STC 25 M bearing cross reference?
Brand Name: | Danfoss Shut-off valves |
Model Number: | 148B4649 STC 25 M |
Minor Diameter: | 45.0 LB |
Cover End Flow @ RPM: | Flange Mount |
Model No.: | Right Hand (CW) |
Port Orientation - Cover End: | 2520VQ17A8-11DD20 |
Pressure Port Size, Shaft End: | 2 1/2 |
Shaft Dia.: | Flange |
Shaft Key: | N/A |
Cover End RPM [Max: | Standard Pilot |
Product Details
Minor Diameter | 45.0 LB |
Cover End Flow @ RPM | Flange Mount |
Model No. | Right Hand (CW) |
Port Orientation - Cover End | 2520VQ17A8-11DD20 |
Pressure Port Size, Shaft End | 2 1/2 |
Shaft Dia. | Flange |
Shaft Key | N/A |
Cover End RPM [Max | Standard Pilot |
Minor Diameter [Min | 0.875 in |
Port Size | 13 Tooth Splined |
Major Diameter [Min | 2520VQ |
Port Orientation - Shaft End | 1 3/8 in |
Manufacturer Part No. | Buna-N |
Max. RPM [Max | 2500 |
Shaft Type | 0.715 in |
Shaft Seal Type | SAE B, 2 Bolt |
Mounting Flange | Single Shaft Seal |
Relief Valve Setting | 16/32 |
Major Diameter [Max | 2700 |
Weight | 2500 |
Controlled Flow Rate | N/A |
Mounting | 8 gal/min @ 1200 rpm, 12 gal/min @ 1800 rpm |
Shaft End RPM [Max | 0.873 in |
Shaft End Pressure [Max | 0.872 in |
Displacement Cover End (cu in/revolution) | N/A |
Spline Description | N/A |
Rotation | N/A |
Integral Valve Configuration | 17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
Minor Diameter [Max | 2520VQ17A8-11DD20 |
Shaft Length | 3000 |
Pump Series | 3000 |
Pilot Type | 12 |
Shaft End Flow @ RPM | 25.5 |
Displacement Shaft End (cu in/revolution) | w/o Integral Valves |
Port Type | Outlet 135° CW from Inlet |
Pressure Port Size, Cover End | Outlet 90° CW from Inlet |
GPM @ 1,800 rpm, Shaft End | 3/4 in Flange |
Cover End Pressure [Max | 1 in Flange |
GPM @ 1,800 rpm, Cover End | 1.67 |
Seal Material | 3.37 |