BOSCH 0445120212 injector
BOSCH 0445120212 injector 15.9 in Dimension H2 Product Brochures , 1570 rpm Maximum Speed BOSCH injector 94869 lbf Cr - Dynamic Load Rating Manufacturing Service . GAS Pump Technology Co.,Ltd Get Your Free.
What is 0445120212 bearing cross reference？
| Brand Name: | BOSCH |
| Model Number: | 0445120212 |
| Spline Description: | 75.0 LB |
| Max. RPM [Max: | Flange Mount |
| Pressure Port Size, Shaft End: | Right Hand (CW) |
| Pump Series: | 3520VQ38A11-11BB20 |
| Weight: | 3 |
| Shaft End RPM [Max: | Flange |
| Shaft End Pressure [Max: | N/A |
| Shaft Key: | Standard Pilot |
Product Details
| Spline Description | 75.0 LB |
| Max. RPM [Max | Flange Mount |
| Pressure Port Size, Shaft End | Right Hand (CW) |
| Pump Series | 3520VQ38A11-11BB20 |
| Weight | 3 |
| Shaft End RPM [Max | Flange |
| Shaft End Pressure [Max | N/A |
| Shaft Key | Standard Pilot |
| Cover End Flow @ RPM | 1.25 in |
| Relief Valve Setting | 14 Tooth Splined |
| Mounting | 3520VQ |
| Pressure Port Size, Cover End | 1 15/16 in |
| Shaft Type | Buna-N |
| Controlled Flow Rate | 2400 |
| Seal Material | 1.04 in |
| Cover End RPM [Max | SAE C, 2 Bolt |
| Shaft End Flow @ RPM | Single Shaft Seal |
| Major Diameter [Max | 12/24 |
| Port Type | 2500 |
| Mounting Flange | 2400 |
| Port Size | N/A |
| Displacement Shaft End (cu in/revolution) | 11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End | 1.248 in |
| Port Orientation - Cover End | 1.247 in |
| Shaft Length | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Pilot Type | N/A |
| Major Diameter [Min | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Minor Diameter [Min | 3520VQ38A11-11BB20 |
| Integral Valve Configuration | 3000 |
| Minor Diameter | 3000 |
| GPM @ 1,800 rpm, Shaft End | 16.5 |
| Shaft Seal Type | 57 |
| Manufacturer Part No. | w/o Integral Valves |
| Port Orientation - Shaft End | Outlet 45° CCW from Inlet |
| Minor Diameter [Max | Outlet 90° CCW from Inlet |
| Model No. | 3/4 in Flange |
| Cover End Pressure [Max | 1 1/4 in Flange |
| Shaft Dia. | 2.22 |
| Rotation | 7.42 |
