Rexroth Z2FS6-2-4X/2Q THROTTLE VALVE
Browse Rexroth Z2FS6-2-4X/2Q THROTTLE VALVE Categories in GAS Pump Technology Co.,Ltd the Manufacturers Online Free. C3 internal clearance: including 4000 RPM maximum rpm: Rexroth THROTTLE VALVE. 200 mm D
What is Z2FS6-2-4X/2Q bearing cross reference？
| Brand Name: | Rexroth |
| Model Number: | Z2FS6-2-4X/2Q |
| Controlled Flow Rate: | 45.0 LB |
| Shaft Dia.: | Flange Mount |
| Model No.: | Left Hand (CCW) |
| Pressure Port Size, Cover End: | 2520VQ21A5-1CB20-LH |
| Minor Diameter [Max: | 2 1/2 |
| Max. RPM [Max: | Flange |
| Mounting: | 3/16 in |
| Pilot Type: | Standard Pilot |
Product Details
| Controlled Flow Rate | 45.0 LB |
| Shaft Dia. | Flange Mount |
| Model No. | Left Hand (CCW) |
| Pressure Port Size, Cover End | 2520VQ21A5-1CB20-LH |
| Minor Diameter [Max | 2 1/2 |
| Max. RPM [Max | Flange |
| Mounting | 3/16 in |
| Pilot Type | Standard Pilot |
| Seal Material | 0.875 in |
| Shaft Key | Straight w/ Key |
| Port Orientation - Shaft End | 2520VQ |
| Weight | 1 15/16 in |
| Spline Description | Buna-N |
| Pressure Port Size, Shaft End | 2500 |
| Cover End RPM [Max | N/A |
| GPM @ 1,800 rpm, Cover End | SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) | Single Shaft Seal |
| Port Size | N/A |
| Shaft Seal Type | 2700 |
| Cover End Pressure [Max | 2500 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Integral Valve Configuration | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Manufacturer Part No. | N/A |
| Cover End Flow @ RPM | N/A |
| Shaft End Flow @ RPM | N/A |
| Shaft Length | N/A |
| Shaft End RPM [Max | N/A |
| Shaft Type | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Relief Valve Setting | 2520VQ21A5-1CB20-LH |
| Minor Diameter [Min | 3000 |
| Major Diameter [Min | 3000 |
| Port Orientation - Cover End | 7.5 |
| Major Diameter [Max | 31.5 |
| Port Type | w/o Integral Valves |
| Rotation | Outlet 45° CCW from Inlet |
| Pump Series | Outlet Inline w/Inlet |
| Shaft End Pressure [Max | 3/4 in Flange |
| Minor Diameter | 1 in Flange |
| Mounting Flange | 1.1 |
| GPM @ 1,800 rpm, Shaft End | 4.12 |
