DEUTZ DLLA 145P 1794 injector
DEUTZ DLLA 145P 1794 injector SEARCH - Whether it's agriculture or construction GAS Pump Technology Co.,Ltd equipment your working 12.1 mm b on, Has 7.35 kN Basic dynamic load rating (C) theDEUTZ injector you 7.938x12.700x14.290 need.
| Brand Name: | DEUTZ |
| Model Number: | DLLA 145P 1794 |
| Shaft End Pressure [Max: | 76.0 LB |
| Manufacturer Part No.: | Flange Mount |
| Model No.: | Left Hand (CCW) |
| Major Diameter [Max: | 3525VQ38A21-11AA20-LH |
| Cover End Pressure [Max: | 3 |
| Port Orientation - Cover End: | Flange |
| Shaft Seal Type: | N/A |
| Pilot Type: | Standard Pilot |
Product Details
| Shaft End Pressure [Max | 76.0 LB |
| Manufacturer Part No. | Flange Mount |
| Model No. | Left Hand (CCW) |
| Major Diameter [Max | 3525VQ38A21-11AA20-LH |
| Cover End Pressure [Max | 3 |
| Port Orientation - Cover End | Flange |
| Shaft Seal Type | N/A |
| Pilot Type | Standard Pilot |
| Port Type | 1.25 in |
| Spline Description | 14 Tooth Splined |
| Port Orientation - Shaft End | 3525VQ |
| Shaft Key | 1.9375 in |
| Pressure Port Size, Shaft End | Double |
| Shaft Length | Buna-N |
| Shaft Dia. | 2400 |
| Rotation | 1.04 in |
| Shaft End Flow @ RPM | SAE C, 2 Bolt |
| Controlled Flow Rate | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | 12/24 |
| Max. RPM [Max | 2500 |
| Minor Diameter [Max | 2400 |
| Relief Valve Setting | N/A |
| Minor Diameter | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Cover End Flow @ RPM | 1.248 in |
| Pressure Port Size, Cover End | 1.247 in |
| Cover End RPM [Max | N/A |
| GPM @ 1,800 rpm, Shaft End | N/A |
| Displacement Cover End (cu in/revolution) | N/A |
| Shaft End RPM [Max | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Weight | 3525VQ38A21-11AA20-LH |
| Seal Material | 3000 |
| Shaft Type | 3000 |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Minor Diameter [Min | 57 |
| Mounting | w/o Integral Valves |
| Pump Series | Outlet 135° CCW from Inlet |
| Port Size | Outlet Opposite Inlet |
| Mounting Flange | 1 in Flange |
| Major Diameter [Min | 1 1/4 in Flange |
| Integral Valve Configuration | 4.1 |