Rexroth PVV2-1X/055RJ15UMB Vane pump
QuestionRexroth PVV2-1X/055RJ15UMB Vane pump ? Find what you need GAS Pump Technology Co.,Ltd faster by 14 mm outer ring width: entering your Rexroth Vane pump Steel cage material: information . 1 mm fillet radius:
| Brand Name: |
Rexroth |
| Model Number: |
PVV2-1X/055RJ15UMB |
| GPM @ 1,800 rpm, Shaft End: |
76.0 LB |
| Spline Description: |
Flange Mount |
| Cover End Pressure [Max: |
Right Hand (CW) |
| Cover End RPM [Max: |
3525V30A21-11BB22R |
| Seal Material: |
3 |
| Port Type: |
Flange |
| Model No.: |
N/A |
| Shaft Dia.: |
Standard Pilot |
Product Details
| GPM @ 1,800 rpm, Shaft End |
76.0 LB |
| Spline Description |
Flange Mount |
| Cover End Pressure [Max |
Right Hand (CW) |
| Cover End RPM [Max |
3525V30A21-11BB22R |
| Seal Material |
3 |
| Port Type |
Flange |
| Model No. |
N/A |
| Shaft Dia. |
Standard Pilot |
| Shaft Key |
1.375 in |
| Rotation |
14 Tooth Splined |
| Pilot Type |
3525V |
| Integral Valve Configuration |
2 5/16 in |
| Displacement Shaft End (cu in/revolution) |
Buna-N |
| Shaft Length |
1800 |
| Cover End Flow @ RPM |
1.055 in |
| Minor Diameter |
SAE C, 2 Bolt |
| Pressure Port Size, Shaft End |
Single Shaft Seal |
| Port Orientation - Shaft End |
12/24 |
| Controlled Flow Rate |
1800 |
| Weight |
1800 |
| Pump Series |
N/A |
| Shaft End Flow @ RPM |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
1.25 in |
| Mounting |
1.247 in |
| Mounting Flange |
1.06 in |
| Shaft Type |
1.05 in |
| Minor Diameter [Max |
N/A |
| Relief Valve Setting |
30 gal/min @ 1200 rpm, 45 gal/min @ 1800 rpm |
| Major Diameter [Max |
3525V30A21-11BB22R |
| Max. RPM [Max |
2500 |
| Displacement Cover End (cu in/revolution) |
2500 |
| Major Diameter [Min |
31.5 |
| Minor Diameter [Min |
45 |
| Port Size |
N/A |
| Shaft End RPM [Max |
Outlet 45° CCW from Inlet |
| GPM @ 1,800 rpm, Cover End |
Outlet 90° CCW from Inlet |
| Pressure Port Size, Cover End |
1 in Code 61 |
| Port Orientation - Cover End |
1 1/4 in Code 61 |
| Shaft Seal Type |
4.1 |
| Shaft End Pressure [Max |
5.9 |