Danfoss Shut-off valves 148B4684 STC 125 M STR SHUT-OFF VALVE CAP
The online Danfoss Shut-off valves 148B4684 STC 125 M STR SHUT-OFF VALVE CAP parts 55 Width (mm) store gives you 95 Bore Diameter (mm) immediate access to a GAS Pump Technology Co.,Ltd selection 95x240x55 of more than 1.4 million new, used, remanufactured.
| Brand Name: |
Danfoss Shut-off valves |
| Model Number: |
148B4684 STC 125 M |
| Shaft End RPM [Max: |
76.0 LB |
| Relief Valve Setting: |
Flange Mount |
| Minor Diameter [Max: |
Right Hand (CW) |
| Minor Diameter: |
3525VQ38A12-1AA20 |
| Major Diameter [Min: |
3 |
| Max. RPM [Max: |
Flange |
| Shaft Key: |
5/16 in |
| GPM @ 1,800 rpm, Cover End: |
Standard Pilot |
Product Details
| Shaft End RPM [Max |
76.0 LB |
| Relief Valve Setting |
Flange Mount |
| Minor Diameter [Max |
Right Hand (CW) |
| Minor Diameter |
3525VQ38A12-1AA20 |
| Major Diameter [Min |
3 |
| Max. RPM [Max |
Flange |
| Shaft Key |
5/16 in |
| GPM @ 1,800 rpm, Cover End |
Standard Pilot |
| Port Type |
1.25 in |
| Port Orientation - Cover End |
Straight w/ Key |
| Shaft End Pressure [Max |
3525VQ |
| Shaft Seal Type |
2 1/2 in |
| GPM @ 1,800 rpm, Shaft End |
Double |
| Port Size |
Buna-N |
| Manufacturer Part No. |
2400 |
| Pilot Type |
N/A |
| Mounting |
SAE C, 2 Bolt |
| Port Orientation - Shaft End |
Single Shaft Seal |
| Controlled Flow Rate |
N/A |
| Rotation |
2500 |
| Cover End Flow @ RPM |
2400 |
| Integral Valve Configuration |
N/A |
| Pump Series |
12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Mounting Flange |
N/A |
| Weight |
N/A |
| Displacement Shaft End (cu in/revolution) |
7.4 |
| Shaft Length |
N/A |
| Spline Description |
N/A |
| Shaft Type |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Shaft Dia. |
3525VQ38A12-1AA20 |
| Seal Material |
3000 |
| Model No. |
3000 |
| Shaft End Flow @ RPM |
18 |
| Minor Diameter [Min |
57 |
| Cover End RPM [Max |
w/o Integral Valves |
| Pressure Port Size, Cover End |
Outlet 135° CCW from Inlet |
| Cover End Pressure [Max |
Outlet Opposite Inlet |
| Pressure Port Size, Shaft End |
1 in Flange |
| Displacement Cover End (cu in/revolution) |
1 1/4 in Flange |
| Major Diameter [Max |
2.5 |