CAT 217-2570 injector
With over 2.00 mm Fillet Radius ra 10170 full-service stores, our CAT 217-2570 injector inventory is extensive and our parts are priced right. within 24 hours. This helps you maximize your productivity by saving 68.30 mm B time and your GAS Pump Technology Co.,Ltd hard-earned dollars.
| Brand Name: | CAT |
| Model Number: | 217-2570 |
| Major Diameter [Max: | 32.0 LB |
| Minor Diameter: | Flange Mount |
| Shaft End Flow @ RPM: | Right Hand (CW) |
| Model No.: | 25VQ19A-1D20 |
| GPM @ 1,800 rpm, Shaft End: | 1 1/2 |
| Controlled Flow Rate: | Flange |
| GPM @ 1,800 rpm, Cover End: | 3/16 in |
| Pressure Port Size, Shaft End: | 20 |
Product Details
| Major Diameter [Max | 32.0 LB |
| Minor Diameter | Flange Mount |
| Shaft End Flow @ RPM | Right Hand (CW) |
| Model No. | 25VQ19A-1D20 |
| GPM @ 1,800 rpm, Shaft End | 1 1/2 |
| Controlled Flow Rate | Flange |
| GPM @ 1,800 rpm, Cover End | 3/16 in |
| Pressure Port Size, Shaft End | 20 |
| Shaft End RPM [Max | 19 gpm @ 1200 rpm |
| Port Orientation - Cover End | 1 |
| Cover End RPM [Max | 0.875 in |
| Port Orientation - Shaft End | Straight w/ Key |
| Minor Diameter [Max | 28.5 gpm @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 25VQ |
| Port Type | 2.31 in |
| Shaft Dia. | None |
| Relief Valve Setting | 1 in Flange |
| Weight | Buna-N |
| Rotation | 2500 |
| Shaft Seal Type | 3000 psi |
| Manufacturer Part No. | 28 1/2 |
| Displacement Cover End (cu in/revolution) | A |
| Cover End Pressure [Max | SAE B, 2 Bolt |
| Pilot Type | Single Shaft Seal |
| Seal Material | 90° CW from Inlet |
| Cover End Flow @ RPM | 25VQ19A-1D20 |
| Pump Series | 3.66 |
| Spline Description | w/o Integral Valves |