Rexroth PVV5-1X/162RA15DMB Vane pump
How GAS Pump Technology Co.,Ltd do I place an 3 mm bearing width: EMERGENCY Roller & Cage As thrust bearing type: order for a Rexroth PVV5-1X/162RA15DMB Vane pump that I want to pick 60 mm d up at a our store?
| Brand Name: |
Rexroth |
| Model Number: |
PVV5-1X/162RA15DMB |
| Cover End Flow @ RPM: |
76.0 LB |
| Displacement Shaft End (cu in/revolution): |
Flange Mount |
| Pressure Port Size, Cover End: |
Left Hand (CCW) |
| Pressure Port Size, Shaft End: |
3525VQ38A17-11AA20-LH |
| Controlled Flow Rate: |
3 |
| Model No.: |
Flange |
| Minor Diameter [Max: |
N/A |
| Port Type: |
Standard Pilot |
Product Details
| Cover End Flow @ RPM |
76.0 LB |
| Displacement Shaft End (cu in/revolution) |
Flange Mount |
| Pressure Port Size, Cover End |
Left Hand (CCW) |
| Pressure Port Size, Shaft End |
3525VQ38A17-11AA20-LH |
| Controlled Flow Rate |
3 |
| Model No. |
Flange |
| Minor Diameter [Max |
N/A |
| Port Type |
Standard Pilot |
| Pilot Type |
1.25 in |
| Cover End Pressure [Max |
14 Tooth Splined |
| Integral Valve Configuration |
3525VQ |
| Port Orientation - Shaft End |
1 15/16 in |
| Seal Material |
Buna-N |
| Major Diameter [Min |
2400 |
| GPM @ 1,800 rpm, Cover End |
1.04 in |
| Cover End RPM [Max |
SAE C, 2 Bolt |
| Port Size |
Single Shaft Seal |
| Shaft Length |
12/24 |
| Rotation |
2500 |
| Shaft End Flow @ RPM |
2400 |
| Shaft Type |
N/A |
| Relief Valve Setting |
17 gal/min @ 1200 rpm, 25.5 gal/min @ 1800 rpm |
| Spline Description |
1.248 in |
| Minor Diameter [Min |
1.247 in |
| Mounting Flange |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Max. RPM [Max |
N/A |
| Shaft Seal Type |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Shaft Dia. |
3525VQ38A17-11AA20-LH |
| Shaft Key |
3000 |
| Weight |
3000 |
| Pump Series |
25.5 |
| Major Diameter [Max |
57 |
| Shaft End RPM [Max |
w/o Integral Valves |
| Manufacturer Part No. |
Outlet 135° CCW from Inlet |
| Mounting |
Outlet Opposite Inlet |
| Port Orientation - Cover End |
1 in Flange |
| Minor Diameter |
1 1/4 in Flange |
| Shaft End Pressure [Max |
3.37 |
| GPM @ 1,800 rpm, Shaft End |
7.42 |