BOSCH 0445120212 injector
BOSCH 0445120212 injector 15.9 in Dimension H2 Product Brochures , 1570 rpm Maximum Speed BOSCH injector 94869 lbf Cr - Dynamic Load Rating Manufacturing Service . GAS Pump Technology Co.,Ltd Get Your Free.
What is 0445120212 bearing cross reference？
| Brand Name: |
BOSCH |
| Model Number: |
0445120212 |
| Spline Description: |
75.0 LB |
| Max. RPM [Max: |
Flange Mount |
| Pressure Port Size, Shaft End: |
Right Hand (CW) |
| Pump Series: |
3520VQ38A11-11BB20 |
| Weight: |
3 |
| Shaft End RPM [Max: |
Flange |
| Shaft End Pressure [Max: |
N/A |
| Shaft Key: |
Standard Pilot |
Product Details
| Spline Description |
75.0 LB |
| Max. RPM [Max |
Flange Mount |
| Pressure Port Size, Shaft End |
Right Hand (CW) |
| Pump Series |
3520VQ38A11-11BB20 |
| Weight |
3 |
| Shaft End RPM [Max |
Flange |
| Shaft End Pressure [Max |
N/A |
| Shaft Key |
Standard Pilot |
| Cover End Flow @ RPM |
1.25 in |
| Relief Valve Setting |
14 Tooth Splined |
| Mounting |
3520VQ |
| Pressure Port Size, Cover End |
1 15/16 in |
| Shaft Type |
Buna-N |
| Controlled Flow Rate |
2400 |
| Seal Material |
1.04 in |
| Cover End RPM [Max |
SAE C, 2 Bolt |
| Shaft End Flow @ RPM |
Single Shaft Seal |
| Major Diameter [Max |
12/24 |
| Port Type |
2500 |
| Mounting Flange |
2400 |
| Port Size |
N/A |
| Displacement Shaft End (cu in/revolution) |
11 gal/min @ 1200 rpm, 16.5 gal/min @ 1800 rpm |
| GPM @ 1,800 rpm, Cover End |
1.248 in |
| Port Orientation - Cover End |
1.247 in |
| Shaft Length |
N/A |
| Displacement Cover End (cu in/revolution) |
N/A |
| Pilot Type |
N/A |
| Major Diameter [Min |
38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Minor Diameter [Min |
3520VQ38A11-11BB20 |
| Integral Valve Configuration |
3000 |
| Minor Diameter |
3000 |
| GPM @ 1,800 rpm, Shaft End |
16.5 |
| Shaft Seal Type |
57 |
| Manufacturer Part No. |
w/o Integral Valves |
| Port Orientation - Shaft End |
Outlet 45° CCW from Inlet |
| Minor Diameter [Max |
Outlet 90° CCW from Inlet |
| Model No. |
3/4 in Flange |
| Cover End Pressure [Max |
1 1/4 in Flange |
| Shaft Dia. |
2.22 |
| Rotation |
7.42 |