CAT 10R7660 injector
How Open Type Seals or Shields: 22340cck/c3w33-skf SKU: do you find the CAT 10R7660 injector GAS Pump Technology Co.,Ltd specification? Manufacturers Online Free check！
| Brand Name: | CAT |
| Model Number: | 10R7660 |
| Mounting: | 45.0 LB |
| Shaft Dia.: | Flange Mount |
| GPM @ 1,800 rpm, Shaft End: | Right Hand (CW) |
| Port Orientation - Cover End: | 2520V12A5-11AA22R |
| Cover End Flow @ RPM: | 2 1/2 |
| Port Type: | Flange |
| Pressure Port Size, Shaft End: | N/A |
| Integral Valve Configuration: | Standard Pilot |
Product Details
| Mounting | 45.0 LB |
| Shaft Dia. | Flange Mount |
| GPM @ 1,800 rpm, Shaft End | Right Hand (CW) |
| Port Orientation - Cover End | 2520V12A5-11AA22R |
| Cover End Flow @ RPM | 2 1/2 |
| Port Type | Flange |
| Pressure Port Size, Shaft End | N/A |
| Integral Valve Configuration | Standard Pilot |
| Relief Valve Setting | 1.09 in |
| Seal Material | 13 Tooth Splined |
| Shaft Key | 2520V |
| Model No. | 1.75 in |
| Shaft End Pressure [Max | Buna-N |
| Pump Series | 1800 |
| Cover End Pressure [Max | 0.7285 in |
| Weight | SAE B, 2 Bolt |
| Shaft Length | Single Shaft Seal |
| Manufacturer Part No. | 16/32 |
| Rotation | 1800 |
| Mounting Flange | 1800 |
| Controlled Flow Rate | N/A |
| Spline Description | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Displacement Shaft End (cu in/revolution) | 0.873 in |
| Minor Diameter | 0.872 in |
| Major Diameter [Min | 0.734 in |
| GPM @ 1,800 rpm, Cover End | 0.723 in |
| Minor Diameter [Min | N/A |
| Cover End RPM [Max | 12 gal/min @ 1200 rpm, 18 gal/min @ 1800 rpm |
| Max. RPM [Max | 2520V12A5-11AA22R |
| Port Orientation - Shaft End | 3000 |
| Pressure Port Size, Cover End | 2500 |
| Displacement Cover End (cu in/revolution) | 7.5 |
| Minor Diameter [Max | 18 |
| Major Diameter [Max | N/A |
| Shaft End RPM [Max | Outlet 135° CCW from Inlet |
| Shaft Type | Outlet Opposite Inlet |
| Shaft End Flow @ RPM | 3/4 in Code 61 |
| Shaft Seal Type | 1 in Code 61 |
| Port Size | 1.1 |
| Pilot Type | 2.5 |