Rexroth M-3SEW6C3X/420MG205N9K4 THROTTLE VALVE
Rexroth M-3SEW6C3X/420MG205N9K4 THROTTLE VALVE Engineering Calculator C3 internal clearance: , GAS Pump Technology Co.,Ltd Rexroth THROTTLE VALVE Manufacturing Service . 165 mm outer ring width: Get Your Not Rated precision rating: Free.
| Brand Name: | Rexroth |
| Model Number: | M-3SEW6C3X/420MG205N9K4 |
| Displacement Shaft End (cu in/revolution): | 75.0 LB |
| Shaft End Flow @ RPM: | Flange Mount |
| Port Size: | Right Hand (CW) |
| Minor Diameter [Min: | 3520VQ38A5-1AA20 |
| Pump Series: | 3 |
| Displacement Cover End (cu in/revolution): | Flange |
| Cover End Flow @ RPM: | 5/16 in |
| Port Orientation - Cover End: | Standard Pilot |
Product Details
| Displacement Shaft End (cu in/revolution) | 75.0 LB |
| Shaft End Flow @ RPM | Flange Mount |
| Port Size | Right Hand (CW) |
| Minor Diameter [Min | 3520VQ38A5-1AA20 |
| Pump Series | 3 |
| Displacement Cover End (cu in/revolution) | Flange |
| Cover End Flow @ RPM | 5/16 in |
| Port Orientation - Cover End | Standard Pilot |
| Mounting | 1.25 in |
| Max. RPM [Max | Straight w/ Key |
| Shaft Seal Type | 3520VQ |
| Relief Valve Setting | 2 1/2 in |
| Model No. | Buna-N |
| Weight | 2400 |
| Shaft End RPM [Max | N/A |
| Shaft Type | SAE C, 2 Bolt |
| Seal Material | Single Shaft Seal |
| Port Orientation - Shaft End | N/A |
| Minor Diameter [Max | 2500 |
| GPM @ 1,800 rpm, Cover End | 2400 |
| Major Diameter [Max | N/A |
| GPM @ 1,800 rpm, Shaft End | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Controlled Flow Rate | N/A |
| Shaft Key | N/A |
| Pressure Port Size, Cover End | N/A |
| Pilot Type | N/A |
| Cover End Pressure [Max | N/A |
| Spline Description | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Pressure Port Size, Shaft End | 3520VQ38A5-1AA20 |
| Minor Diameter | 3000 |
| Cover End RPM [Max | 3000 |
| Shaft End Pressure [Max | 7.5 |
| Major Diameter [Min | 57 |
| Integral Valve Configuration | w/o Integral Valves |
| Port Type | Outlet 135° CCW from Inlet |
| Manufacturer Part No. | Outlet Opposite Inlet |
| Shaft Dia. | 3/4 in Flange |
| Shaft Length | 1 1/4 in Flange |
| Rotation | 1.1 |
| Mounting Flange | 7.42 |