Rexroth Z2FS6-2-4X/2Q THROTTLE VALVE
Browse Rexroth Z2FS6-2-4X/2Q THROTTLE VALVE Categories in GAS Pump Technology Co.,Ltd the Manufacturers Online Free. C3 internal clearance: including 4000 RPM maximum rpm: Rexroth THROTTLE VALVE. 200 mm D
What is Z2FS6-2-4X/2Q bearing cross reference？
| Brand Name: |
Rexroth |
| Model Number: |
Z2FS6-2-4X/2Q |
| Controlled Flow Rate: |
45.0 LB |
| Shaft Dia.: |
Flange Mount |
| Model No.: |
Left Hand (CCW) |
| Pressure Port Size, Cover End: |
2520VQ21A5-1CB20-LH |
| Minor Diameter [Max: |
2 1/2 |
| Max. RPM [Max: |
Flange |
| Mounting: |
3/16 in |
| Pilot Type: |
Standard Pilot |
Product Details
| Controlled Flow Rate |
45.0 LB |
| Shaft Dia. |
Flange Mount |
| Model No. |
Left Hand (CCW) |
| Pressure Port Size, Cover End |
2520VQ21A5-1CB20-LH |
| Minor Diameter [Max |
2 1/2 |
| Max. RPM [Max |
Flange |
| Mounting |
3/16 in |
| Pilot Type |
Standard Pilot |
| Seal Material |
0.875 in |
| Shaft Key |
Straight w/ Key |
| Port Orientation - Shaft End |
2520VQ |
| Weight |
1 15/16 in |
| Spline Description |
Buna-N |
| Pressure Port Size, Shaft End |
2500 |
| Cover End RPM [Max |
N/A |
| GPM @ 1,800 rpm, Cover End |
SAE B, 2 Bolt |
| Displacement Cover End (cu in/revolution) |
Single Shaft Seal |
| Port Size |
N/A |
| Shaft Seal Type |
2700 |
| Cover End Pressure [Max |
2500 |
| Displacement Shaft End (cu in/revolution) |
N/A |
| Integral Valve Configuration |
5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Manufacturer Part No. |
N/A |
| Cover End Flow @ RPM |
N/A |
| Shaft End Flow @ RPM |
N/A |
| Shaft Length |
N/A |
| Shaft End RPM [Max |
N/A |
| Shaft Type |
21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Relief Valve Setting |
2520VQ21A5-1CB20-LH |
| Minor Diameter [Min |
3000 |
| Major Diameter [Min |
3000 |
| Port Orientation - Cover End |
7.5 |
| Major Diameter [Max |
31.5 |
| Port Type |
w/o Integral Valves |
| Rotation |
Outlet 45° CCW from Inlet |
| Pump Series |
Outlet Inline w/Inlet |
| Shaft End Pressure [Max |
3/4 in Flange |
| Minor Diameter |
1 in Flange |
| Mounting Flange |
1.1 |
| GPM @ 1,800 rpm, Shaft End |
4.12 |