Rexroth A10VSO45DFR1/31R-PPA12N00 Piston Pump
100% GAS Pump Technology Co.,Ltd Authentic. 12.205 Inch | 310 Mi D Rexroth A10VSO45DFR1/31R-PPA12N00 Piston Pump 4.016 Inch | 102 Mil B Highest Phenolic Cage Material Quality. Certified Supplier.
| Brand Name: | Rexroth |
| Model Number: | A10VSO45DFR1/31R-PPA12N00 |
| Weight: | 76.0 LB |
| Pressure Port Size, Shaft End: | Flange Mount |
| Rotation: | Left Hand (CCW) |
| Cover End RPM [Max: | 3525VQ38A21-11AA20-LH |
| Major Diameter [Max: | 3 |
| Displacement Cover End (cu in/revolution): | Flange |
| Shaft End Pressure [Max: | N/A |
| Max. RPM [Max: | Standard Pilot |
Product Details
| Weight | 76.0 LB |
| Pressure Port Size, Shaft End | Flange Mount |
| Rotation | Left Hand (CCW) |
| Cover End RPM [Max | 3525VQ38A21-11AA20-LH |
| Major Diameter [Max | 3 |
| Displacement Cover End (cu in/revolution) | Flange |
| Shaft End Pressure [Max | N/A |
| Max. RPM [Max | Standard Pilot |
| Controlled Flow Rate | 1.25 in |
| Minor Diameter | 14 Tooth Splined |
| Seal Material | 3525VQ |
| Shaft End Flow @ RPM | 1.9375 in |
| GPM @ 1,800 rpm, Cover End | Double |
| Port Size | Buna-N |
| Relief Valve Setting | 2400 |
| Port Type | 1.04 in |
| Shaft Length | SAE C, 2 Bolt |
| Cover End Flow @ RPM | Single Shaft Seal |
| Cover End Pressure [Max | 12/24 |
| GPM @ 1,800 rpm, Shaft End | 2500 |
| Port Orientation - Cover End | 2400 |
| Minor Diameter [Min | N/A |
| Shaft End RPM [Max | 21 gal/min @ 1200 rpm, 31.5 gal/min @ 1800 rpm |
| Pump Series | 1.248 in |
| Shaft Dia. | 1.247 in |
| Shaft Type | N/A |
| Mounting | N/A |
| Manufacturer Part No. | N/A |
| Shaft Seal Type | 38 gal/min @ 1200 rpm, 57 gal/min @ 1800 rpm |
| Port Orientation - Shaft End | 3525VQ38A21-11AA20-LH |
| Integral Valve Configuration | 3000 |
| Pilot Type | 3000 |
| Shaft Key | 31.5 |
| Minor Diameter [Max | 57 |
| Pressure Port Size, Cover End | w/o Integral Valves |
| Major Diameter [Min | Outlet 135° CCW from Inlet |
| Displacement Shaft End (cu in/revolution) | 7.4 |
| Mounting Flange | 1 in Flange |
| Model No. | 1 1/4 in Flange |
| Spline Description | 4.1 |