PAKER PV270 R1K1T1NMMC Piston Pump
With over 10170 full-service stores, our PAKER PV270 R1K1T1NMMC Piston Pump inventory is extensive and our parts GAS Pump Technology Co.,Ltd are priced right. within 24 hours. This helps you maximize your productivity by saving time and your 0.157 Fatigue Load Rating (kN): hard-earned dollars.
| Brand Name: | PAKER |
| Model Number: | PV270 R1K1T1NMMC |
| Minor Diameter: | 35.0 LB |
| Mounting Flange: | Flange Mount |
| Shaft End RPM [Max: | Left Hand (CCW) |
| Weight: | V2020-1F7S6S-11AA30-LH |
| Shaft Length: | 2 |
| Rotation: | Flange |
| Shaft Key: | N/A |
| Model No.: | N/A |
Product Details
| Minor Diameter | 35.0 LB |
| Mounting Flange | Flange Mount |
| Shaft End RPM [Max | Left Hand (CCW) |
| Weight | V2020-1F7S6S-11AA30-LH |
| Shaft Length | 2 |
| Rotation | Flange |
| Shaft Key | N/A |
| Model No. | N/A |
| Port Size | 0.875 in |
| Pilot Type | 13 Tooth Splined |
| Cover End Flow @ RPM | V2020 |
| Mounting | 1 5/16 in |
| Manufacturer Part No. | Buna-N |
| Shaft End Flow @ RPM | 3000 |
| Pump Series | 0.728 in |
| Pressure Port Size, Cover End | SAE B, 2 Bolt |
| Controlled Flow Rate | Single Shaft Seal |
| Integral Valve Configuration | 16/32 |
| Port Orientation - Cover End | 3000 |
| Shaft Dia. | 3000 |
| Seal Material | N/A |
| Cover End RPM [Max | 6 gal/min @ 1200 rpm, 9 gal/min @ 1800 rpm |
| Major Diameter [Min | 0.873 in |
| Shaft End Pressure [Max | 0.872 in |
| Shaft Type | 0.7335 in |
| Major Diameter [Max | 0.7225 in |
| Cover End Pressure [Max | N/A |
| Relief Valve Setting | 7 gal/min @ 1200 rpm, 10.5 gal/min @ 1800 rpm |
| Minor Diameter [Max | V2020-1F7S6S-11AA30-LH |
| Minor Diameter [Min | 2500 |
| Displacement Shaft End (cu in/revolution) | 2500 |
| Displacement Cover End (cu in/revolution) | 9 |
| Port Type | 10.5 |
| Shaft Seal Type | N/A |
| Pressure Port Size, Shaft End | Outlet Opposite Inlet |
| Spline Description | Outlet Opposite Inlet |
| Max. RPM [Max | 3/4 in SAE O-Ring |
| GPM @ 1,800 rpm, Shaft End | 3/4 in SAE O-Ring |
| GPM @ 1,800 rpm, Cover End | 1.19 |
| Port Orientation - Shaft End | 1.39 |