Rexroth M-2SEW6N3X/420MG205N9K4 THROTTLE VALVE
Manufacturers of all Rexroth THROTTLE VALVE are represented in our GAS Pump Technology Co.,Ltd partial list of clients. 0.19 kg Mass Contact Gary for a complete Rexroth M-2SEW6N3X/420MG205N9K4 THROTTLE VALVE list of clients 2 mm slot depth: and projects.
| Brand Name: | Rexroth |
| Model Number: | M-2SEW6N3X/420MG205N9K4 |
| Cover End RPM [Max: | 75.0 LB |
| Mounting Flange: | Flange Mount |
| Port Type: | Left Hand (CCW) |
| Port Size: | 3520VQ35A5-1CC20-LH |
| Pressure Port Size, Cover End: | 3 |
| Minor Diameter: | Flange |
| Manufacturer Part No.: | 5/16 in |
| Shaft End RPM [Max: | Standard Pilot |
Product Details
| Cover End RPM [Max | 75.0 LB |
| Mounting Flange | Flange Mount |
| Port Type | Left Hand (CCW) |
| Port Size | 3520VQ35A5-1CC20-LH |
| Pressure Port Size, Cover End | 3 |
| Minor Diameter | Flange |
| Manufacturer Part No. | 5/16 in |
| Shaft End RPM [Max | Standard Pilot |
| Shaft End Pressure [Max | 1.25 in |
| Minor Diameter [Max | Straight w/ Key |
| Cover End Flow @ RPM | 3520VQ |
| Integral Valve Configuration | 2.5 in |
| Port Orientation - Cover End | Buna-N |
| Seal Material | 2400 |
| Spline Description | N/A |
| Pressure Port Size, Shaft End | SAE C, 2 Bolt |
| Major Diameter [Max | Single Shaft Seal |
| GPM @ 1,800 rpm, Cover End | N/A |
| Port Orientation - Shaft End | 2500 |
| Shaft Dia. | 2400 |
| Displacement Shaft End (cu in/revolution) | N/A |
| Controlled Flow Rate | 5 gal/min @ 1200 rpm, 7.5 gal/min @ 1800 rpm |
| Displacement Cover End (cu in/revolution) | N/A |
| Pilot Type | N/A |
| Model No. | N/A |
| Cover End Pressure [Max | N/A |
| Weight | N/A |
| Mounting | 35 gal/min @ 1200 rpm, 52.5 gal/min @ 1800 rpm |
| Rotation | 3520VQ35A5-1CC20-LH |
| Shaft Seal Type | 3000 |
| Shaft Length | 3000 |
| Relief Valve Setting | 7.5 |
| Shaft Key | 52.5 |
| Max. RPM [Max | w/o Integral Valves |
| Major Diameter [Min | Outlet 45° CW from Inlet |
| Shaft Type | Outlet Inline w/Inlet |
| GPM @ 1,800 rpm, Shaft End | 3/4 in Flange |
| Pump Series | 1 1/4 in Flange |
| Shaft End Flow @ RPM | 1.1 |
| Minor Diameter [Min | 6.88 |